High-Temperature Lubricants for Steel & Metals Plants
Greases that stay put under water spray, radiant heat and shock loads.
What Steel & Primary Metals Equipment Is Up Against
Water spray and washout
Caster and rolling mill bearings sit under high-volume cooling water that physically blasts grease out of housings.
Radiant heat
Bearings near slabs, furnaces and ladles see extreme heat that oxidizes and carbonizes ordinary grease.
Heavy and shock loads
Roll necks, table rolls and coilers carry enormous loads and sudden impacts.
Fire risk
Grease that drips near molten metal or cutting torches can ignite, putting people and equipment at risk.
Steel and metals plants combine the three things lubricants hate most: heat, water and heavy loads. Caster bearings run under cooling sprays, mill stands carry enormous roll forces, and chains move product through furnaces. A grease that works fine elsewhere in industry can wash out, melt or carbonize here within days.
Why steel mill lubrication is different
The biggest killer is water washout combined with heat. Once the grease is gone, the bearing runs on contaminated oil and fails. Heat also oxidizes lubricants and bakes carbon onto chains and guides, adding cleaning time and wear.
What better products change
Water resistant greases with tacky polymers stay in the housing under spray. Synthetic high-temperature greases and chain oils resist oxidation and leave fewer deposits. Nickel anti-seize keeps hot fasteners removable at the next outage.
How Oilsan helps
We supply HUSKEY™ steel mill greases, high-temperature synthetics, gear and chain oils and anti-seize compounds to steel, aluminum and foundry operations in Türkiye and around the world. Tell us the position and conditions and we will recommend the product.
New Lubrication Technologies for Steel & Primary Metals
Polymer-enhanced water resistant greases
Tacky polymer additives help grease adhere under direct water spray and resist washout from bearing housings.
Synthetic high-temperature greases
Synthetic base oils and non-melting thickeners hold up where mineral oil greases melt, run out or form carbon.
Low-deposit synthetic chain oils
Ester and synthetic oils lubricate furnace and oven chains at high temperature with far less carbon build-up.
Copper-free anti-seize
Nickel anti-seize protects stainless and alloy fasteners on furnaces and hot equipment where copper is not allowed.
HUSKEY™ Products for Steel & Primary Metals
SMP Grease
SMP GREASE is a unique high-temperature, extreme pressure, non-melting, non-caking grease designed for extreme service applications. Blended from pure synthetic base oils and thickeners then coupled with the most modern extreme pressure and anti-wear additives to provide a tough, durable lubricating film that protects against metal to metal contact. HUSKEY SMP GREASE is designed to withstand temperatures from -30°F (-34°C) to 530°F (277°C) with intermittent usage to 600°F (318°C).
Industrial GreasesView product →Dyna-Mite Red Grease
DYNA-MITE RED GREASE is a unique high-temperature, extreme pressure, non-melting premium quality grease designed for very heavy-duty service in adverse environments. It is a blend of high quality petroleum oil and special synthetic polymers which work together to form an extremely water-resistant, tough lubricating film that prevents water washout and metal-to-metal contact even under extreme pressure or shock loading. HUSKEY DYNA-MITE RED GREASE is formulated with the optimum amounts of additives to provide maximum protection against rust, corrosion and oxidation. HUSKEY DYNA-MITE RED GREASE contains no fillers or clay thickeners. The distinctive red color makes it easy to identify during and after lubrication.
Industrial GreasesView product →HTS-2 Moly Grease
HTS-2 MOLY GREASE is a premium quality synthetic high temperature grease fortified with molybdenum disulfide (Moly). Blended completely from pure synthetic base oils and thickeners to provide extended service life and wide temperature ranges. Coupled with the most modern extreme pressure and anti-wear additives it proves an exceptional lubricant for use in industry today. HUSKEY HTS-2 OPERATING RANGE: Base Grease -35°F to 500°F with dry film lubrication to 850°F.
Industrial GreasesView product →105 Hi-Temp Grease
105 HI-TEMP GREASE represents some of the latest in lubrication technology. It is formulated from the highest quality petroleum base stocks coupled with the newest additives available, to help produce the high temperature characteristics usually associated with expensive synthetic based grease. This unique blend, together with its shear stable thickening system, provides the maximum protection against friction, wear and corrosion. HUSKEY 105 HI-TEMP GREASE is not just another “no-melt” grease and does not contain any moly, graphite or clay fillers.
Industrial GreasesView product →SGL-800 Series Oils
SGL-800 SERIES OILS are heavy duty extreme pressure oils formulated from the highest quality selected synthetic base oils and additives available. HUSKEY SGL-800 SERIES OILS have been compounded to be more reliable, even under the toughest conditions. These high quality 100% synthetic oils have been designed to give extra protection in high and low temperature applications. HUSKEY SGL-800 SERIES OILS are NSF H-2 Registered for use in food processing plants.
Industrial OilsView product →650 H.T. Oil
650 HT OIL is a blend of the finest quality pure synthetic base oil and additives available and is formulated with Molybdenum Disulfide (Moly). Superior performance capabilities are derived from special properties of the synthetic base oil coupled with extreme pressure and anti-wear additives. HUSKEY 650 HT OIL is truly a multi-service lubricant for extended service under extremely high and low temperature conditions from -35°F to 500°F with dry film lubrication to 850°F.
Industrial OilsView product →LPC Series Gear Oils
LPC GEAR OILS are high-performance, fully synthetic, all-purpose gear oils formulated with HUSKEY’S new proprietary SEM (Surface Eutectic Modification) additive. The revolutionary new SEM technology makes it a Lower Power Consumption (LPC) gear oil, hence the name LPC Gear Oil. They offer maximum wear protection under extreme operating conditions such as vibrations, scuffing, oscillating motions, and shock loads, where metal asperity contact occurs. Because of the thermally and mechanically stable polyalphaolefin (PAO) base oils and SEM technology, HUSKEY LPC GEAR OILS give extra protection to micro-pitting due to asperity contact. In addition, compared to both conventional mineral and synthetic gear oils the HUSKEY LPC GEAR OILS have proven they can lower the operating temperatures of the gearbox resulting in lower power costs. Due to their high viscosity index, they provide effortless startup even during cold temperatures; yet give extra wear protection in high-temperature applications. The added antifoam protection gives extra protection to high-speed gearboxes. In addition, the demulsification properties of HUSKEY LPC GEAR OILS provide very fast separation from water contamination. They meet or exceed all *major gear oil specifications, original equipment manufacturer requirements, and wind turbine manufacturers.
Industrial OilsView product →684 Nickel Anti-Seize
684 NICKEL ANTI-SEIZE is a heavy-duty anti-seize and lubricating paste containing a balanced blend of pure nickel and graphite, homogenized into a semi-synthetic, non-melting grease base. HUSKEY 684 NICKEL ANTI-SEIZE does not contain any sulfur, lead, copper, halogens or clay fillers. HUSKEY 684 NICKEL ANTI-SEIZE leaves a protective film that seals and protects metal parts, even under the most extreme condition of heat, corrosive and acidic environments.
Anti-Seize & Thread SealantsView product →Common Questions
What grease works best for continuous caster bearings?
You need a grease that resists water washout and high temperature at the same time. HUSKEY SMP Grease was designed primarily for high-temperature steel mill applications and wet environments.
Which anti-seize should we use on furnace fasteners?
For stainless and high-alloy fasteners or where copper is prohibited, use a nickel anti-seize such as HUSKEY 684, rated to 2600°F.
How can we reduce carbon build-up on hot chains?
Switch to a synthetic high-temperature chain oil designed for low deposits, such as HUSKEY 650 H.T. Oil or SGL-800 Series.
Other industries we serve
Right lubricant.
Less downtime.
Tell us about your application and we’ll recommend the right product.