Lubricants for Cement Plants & Aggregates
Open gear, kiln and gearbox lubricants that stand up to heat and abrasive dust.
What Cement & Aggregates Equipment Is Up Against
Abrasive dust
Cement and clinker dust is fine, alkaline and highly abrasive. It gets past seals and turns lubricant into lapping compound.
Girth gears and pinions
Kiln and mill girth gears carry massive torque under shock loads and need a film that will not fling off.
Kiln heat
Kiln tires, support rollers and nearby bearings run hot enough to oxidize and bake ordinary grease.
Long lead times
A failed kiln gearbox or girth gear can mean weeks or months waiting for parts, with the whole plant down.
Cement plants are among the harshest environments any lubricant faces. Kilns run hot, mills and crushers carry heavy shock loads, and a fine, abrasive dust settles on everything. The equipment is large, the parts are expensive, and replacement lead times can stretch for months.
Why cement equipment wears out
Dust contamination is the dominant cause of gearbox and bearing damage. Particle counts in gearbox oil can climb quickly after an oil change if seals and breathers are not up to the job. On open girth gears, the wrong lubricant flings off, leaving teeth unprotected under full load.
Modern solutions
Non-asphaltic open gear lubricants stay on the gear and are easier to clean up. Synthetic gear oils protect heavily loaded gearboxes and run cooler. Oil analysis tells you when dust is getting in before it becomes a failure.
How Oilsan helps
We supply HUSKEY™ open gear lubricants, kiln and crusher greases, synthetic gear oils and high-temperature pastes to cement plants, lime kilns and aggregate operations in Türkiye and around the world.
New Lubrication Technologies for Cement & Aggregates
Non-asphaltic open gear lubricants
Semi-synthetic open gear greases with moly and graphite resist fling-off and build a protective film on gear teeth without the mess of old asphaltic products.
Synthetic gear oils with anti-micro-pitting additives
Heavily loaded mill and kiln gearboxes last longer on synthetic oils that protect against micro-pitting and run cooler.
Oil analysis and filtration
Tracking particle counts and filtering gearbox oil catches dust ingress before it damages gears and bearings.
High-temperature anti-seize pastes
Metal-based pastes keep hot bolts and kiln fittings removable after months of thermal cycling.
HUSKEY™ Products for Cement & Aggregates
Open Gear Grease
OPEN GEAR GREASE is a heavy-duty, highly tenacious, semi-synthetic open gear lubricant containing a balanced blend of molybdenum disulfide (moly) and graphite, incorporated in a non-asphaltic, non-melt base grease that contains no clay fillers. Treated with the most modern additives to provide lasting protection against extreme pressure, wear, rust, and oxidation on gear faces and sliding surfaces operating in temperatures from -5°F to 425°F.
Industrial GreasesView product →Moly-Graph Grease
MOLY-GRAPH Grease is blended from the highest quality selected paraffinic petroleum oils, polymers and shear stable synthetic thickeners available. Treated with the latest chemical E.P. additives, rust and oxidation inhibitors to provide lasting protection against friction, wear and corrosion. Graphite and Molybdenum Disulfide (MOLY) lubricating solids of precise sub-micron and micron size have been completely homogenized into the product to further enhance load capacity, improve metal surfaces and reduce friction. Its Polymer base helps the grease to stay put and seal out dirt, water and other contaminants.
Industrial GreasesView product →105 Hi-Temp Grease
105 HI-TEMP GREASE represents some of the latest in lubrication technology. It is formulated from the highest quality petroleum base stocks coupled with the newest additives available, to help produce the high temperature characteristics usually associated with expensive synthetic based grease. This unique blend, together with its shear stable thickening system, provides the maximum protection against friction, wear and corrosion. HUSKEY 105 HI-TEMP GREASE is not just another “no-melt” grease and does not contain any moly, graphite or clay fillers.
Industrial GreasesView product →HTS-2 Moly Grease
HTS-2 MOLY GREASE is a premium quality synthetic high temperature grease fortified with molybdenum disulfide (Moly). Blended completely from pure synthetic base oils and thickeners to provide extended service life and wide temperature ranges. Coupled with the most modern extreme pressure and anti-wear additives it proves an exceptional lubricant for use in industry today. HUSKEY HTS-2 OPERATING RANGE: Base Grease -35°F to 500°F with dry film lubrication to 850°F.
Industrial GreasesView product →LPC Series Gear Oils
LPC GEAR OILS are high-performance, fully synthetic, all-purpose gear oils formulated with HUSKEY’S new proprietary SEM (Surface Eutectic Modification) additive. The revolutionary new SEM technology makes it a Lower Power Consumption (LPC) gear oil, hence the name LPC Gear Oil. They offer maximum wear protection under extreme operating conditions such as vibrations, scuffing, oscillating motions, and shock loads, where metal asperity contact occurs. Because of the thermally and mechanically stable polyalphaolefin (PAO) base oils and SEM technology, HUSKEY LPC GEAR OILS give extra protection to micro-pitting due to asperity contact. In addition, compared to both conventional mineral and synthetic gear oils the HUSKEY LPC GEAR OILS have proven they can lower the operating temperatures of the gearbox resulting in lower power costs. Due to their high viscosity index, they provide effortless startup even during cold temperatures; yet give extra wear protection in high-temperature applications. The added antifoam protection gives extra protection to high-speed gearboxes. In addition, the demulsification properties of HUSKEY LPC GEAR OILS provide very fast separation from water contamination. They meet or exceed all *major gear oil specifications, original equipment manufacturer requirements, and wind turbine manufacturers.
Industrial OilsView product →SPG-300 Series Oils
SPG-300 SERIES OILS are formulated from Polyalkylene glycol (PAG) base oils and carefully selected additives to provide long service life, excellent wear protection and protection against rust and corrosion. The combination of outstanding oxidation resistance and thermal stability at high temperatures, a very high viscosity index, and excellent low-temperature properties makes them suitable for year round use over a wide temperature range. HUSKEY SPG-300 SERIES OILS are NSF/USDA H-1 *Registered and KOSHER approved which gives them full acceptability for use in all areas where incidental food contact may occur.
Food-Grade Lubricants · Industrial OilsView product →2000 Lubricating Paste and Anti-Seize Compound for High Temperature
2000 is a heavy-duty industrial anti-seize and lubricating paste containing very finely divided metallic particles in a special no-melt semi-synthetic carrier. HUSKEY 2000 leaves a protective film that seals and protects metal parts even under the most extreme conditions of heat, pressure, steam and saltwater exposure.
Anti-Seize & Thread SealantsView product →Dyna-Mite Red Grease
DYNA-MITE RED GREASE is a unique high-temperature, extreme pressure, non-melting premium quality grease designed for very heavy-duty service in adverse environments. It is a blend of high quality petroleum oil and special synthetic polymers which work together to form an extremely water-resistant, tough lubricating film that prevents water washout and metal-to-metal contact even under extreme pressure or shock loading. HUSKEY DYNA-MITE RED GREASE is formulated with the optimum amounts of additives to provide maximum protection against rust, corrosion and oxidation. HUSKEY DYNA-MITE RED GREASE contains no fillers or clay thickeners. The distinctive red color makes it easy to identify during and after lubrication.
Industrial GreasesView product →Common Questions
What lubricant should we use on kiln and mill girth gears?
A tenacious open gear lubricant with solid additives that resists fling-off, such as HUSKEY Open Gear Grease with moly and graphite. Application method matters too, so tell us whether you use spray, idler immersion or manual application.
How do we keep dust out of gearbox oil?
Good breathers and seals help, but routine oil analysis and filtration are the best defense. Pair them with a synthetic gear oil that tolerates heavy loads.
Which grease is best for kiln support roller bearings?
A high-temperature, non-melting grease with extreme pressure additives, such as HUSKEY 105 Hi-Temp or HTS-2 Moly Grease.
Other industries we serve
Right lubricant.
Less downtime.
Tell us about your application and we’ll recommend the right product.